Determination of the environmental flow of rivers using hydrological and hydraulic methods has received more attention due to the available information and less cost and time. The important point in using these methods is to consider the natural conditions of the river by eliminating the effect of upstream withdrawals. To investigate the necessity of naturalization of the flow and its effect on determination of the ecological water supply of Zayandehroud river at the location of the Sad-e-tanzimi station (before major drinking, industrial and agricultural harvests) and Varzaneh station (near Gavkhuni wetland and after harvest and water infiltration) has been selected as a case study. Based on the Tennant method, using the observed and naturalized flows at Varzaneh station, the ecological watercourse showed that if the observed flows are used, it will obtain about 0.6 cubic meters per second. It turned out that there would be practically no water flowing in the river. If naturalized flow is used, 16 percent of the basin runoff potential will be allocated to the environment. The environmental flow obtained from the wetted perimeter method with the curved slope algorithm at the Sad-e-tanzimi and Varzaneh station has estimated 13 and 16 percent of the annual average natural flow, respectively, which is within the acceptable results of the modified Tennant method. Has been located. As a result, the use of the modified Tennant method is recommended due to the ease of calculating and providing the monthly distribution of environmental water, provided that the naturalized flow time series is used at the study stations.

ABSTRACT The attention of contemporary planners to environmental factors and increasing awareness and communication of man with his surrounding environment has increased the layers and defining factors of design and planning concepts. In such a way, a common problem with the issue of environmental capabilities to respond was put in front of the planners. The collection of ideas presented in this era was in the form of responsive planning, focusing on the maximum use of environmental capabilities. The necessity of the emergence of a comprehensive discourse to overcome the plurality of factors, definitions and design methods in the environmental fields has been given less attention. Based on this, the current research aims to organize the leading theories in this field in a targeted manner and seeks to improve them based on their synergy. The structural question of this research is the meanings, examples and meaningful contexts of flexibility in various aspects and scales of urban planning. The research method used is qualitative thematic analysis with the help of artificial intelligence in MAXQDA software in a 6-step processing process. The important application of this research is to structure the minds of the planners of this field to reduce the scattered and interdisciplinary problems of the resources. The results of this research revealed dimensions such as identification and recognizability, diversity and changeability, adaptability and expandability, distribution, separation and continuity, organization and compatibility in the field of flexibility and related to the corresponding parts in urban planning   Extended Abstract Introduction Responsiveness-based design and planning emphasizing the maximum use of environmental capacities to meet users' needs implicitly cause a targeted improvement of environmental quality. As the environmental awareness of contemporary man has expanded and the platforms have become more diverse, many challenges are raised in the field of environment-oriented in the field of infrastructure quality and service provision. Urban developments and new developments in cities should be interpreted with integrated conceptualization. The conceptualization of interpretive flexibility in the planning and designing of public spaces in the city is used as an interdisciplinary perspective in urban space design to open and discuss its connection and potential as an approach to strengthening social cohesion and inclusion. The general definition of flexibility is that it can create places with new forms of meaning and be used for different groups to strengthen its coherence and multidisciplinary inclusion in terms of design and planning of space and body. On this basis, the concept of flexibility is proposed as a principle in the context of design and planning due to its wide range of effects on background phenomena. The history of such a role can be seen in the diversity of users' needs. In such a way, it is impossible to express the specific time and area of the need to pay attention to this concept. This is in line with Oldenburg's theory of "social public spaces," in which being in public space, communicating with people and the environment through observing the streets, sidewalks, squares, and parks of the city is a necessary step for people as a part of their social life. The meaningfulness of the design of the artificial environment was considered. In any case, in the contemporary era, on the one hand, at the same time as the quantitative and qualitative increase of human environmental awareness, there is no longer any phenomenon in the eyes of contemporary man arising from a unique aspect and range of factors. On the other hand, his life needs in the individual and collective dimensions have seen a high diversity, which has led to the formation of multiple semantic domains of past flexibility. The meaning of flexibility in such an interdisciplinary platform and basic design refers to the concept of understanding and responding quickly and efficiently to environmental changes. Such a holistic definition for this broad field of environmental design means the implicit acceptance of the role of scale in the meaningful domain of these concepts. On a macro scale, it means making design options to increase the presence, participation, and power of choices of users of the environment in participatory urban planning and design methods, and on a small scale, it means making design options to increase spatial quality and, as a result, the quality of activities. The daily activities of environmental users are through selection against the "dominant space." Flexibility at different scales is crucial for dimensional optimization, shaping, and structuring spatial features, leading to improved performance of space components and spaces. The development of the concept of "flexibility" from various studies in metropolitan to micro scales, such as interior architecture, allows it to pass the discourse of responsiveness to provide a broad approach to environmental design in which different values, interests, and priorities are prioritized. As a result, the issue of flexibility in environmental design has been raised as a multi-dimensional field in the design and planning of the basic environment. The breadth and complexity of this concept have made the researchers of this field deal with it in one or more ways, and it has been avoided to provide a comprehensive framework about the nature and structuring processes. The current research presents a structured view of flexibility in architecture and urban planning with an environmental approach.   Methodology The methodology to achieve this goal is to use the macro research method and achieve a comprehensive framework by combining categorized interpretations. In such a way that by sorting and categorizing these concepts and bases in a new way, he has found a new level of theoretical findings, which will be a suitable answer for the gaps in scientific knowledge and scientific methods created in this field. In this context, the research method "thematic analysis" has been used with a qualitative approach and the use of library resources. Also, to overcome the breadth and complexity of these concepts and the multi-layer networking of concepts in this research method, artificial intelligence has been used in MAXQDA research assistance software.   Results and discussion In the meantime, attention should also be paid to the fields of influence and application of the results of this research because designers refer to flexibility as the creator of environmental qualities, including dynamism. Also, since flexibility, along with the principles of readability and adaptability, affect the lifestyle and behavioral patterns of the audience of environmental design in architecture and urban planning, it will also be effective in dealing with the challenge of complexity in environmental design factors. One of the key questions for achieving research goals on this issue is how flexibility in environmental design impacts the relationship between flexibility and scale.   Conclusion The most important finding of this research suggests that first, it requires a focus on the conditions under which the processes of perceiving human abilities and discovering the needs of the human audience can manifest. The theoretical framework arises from a comparative approach between design disciplines. These conditions are independent of the final state of the design product, and strengthening the environmental capacities will lead to a direction and an area that includes environmental flexibility. By responding to new situations, the construction of the space and the body within a space building can be adapted to various configurations. Even though the environment may remain constant, the designed place will continue functioning as a strong living system over time.  It also seems that the nature of issues related to flexibility has complexity. Considering that the quality of flexibility in urban planning and architecture is significant in multilevel and multifaceted scales from micro to macro, it is important to pay attention to the scale of different variables. In order to reduce this problem, the consistency and adjustment of the scale of the variables measured in a specific analysis should be considered in the first step.   Funding There is no funding support.   Authors’ Contribution All of the authors approved the content of the manuscript and agreed on all aspects of the work.   Conflict of Interest Authors declared no conflict of interest.   Acknowledgments We are grateful to all the scientific.

In this study, weather conditions such as air humidity, temperature air, and wind speed were investigated in relation to wind turbine efficiency with the approach of an exergy study. In this study, the wind speed has been investigated in two different climatic regions of Iran with an approximate distance of 1200 km, in the names of Ardabil and Marvast. The amount of wind density of Ardabil is equal to 66 (kW/m2) and Marvast is equal to 123 (kW/m2). Power production using a 10 (Kw) wind turbine in the Ardabil region is 2.3 (MWh) and in the Marvast region is 3.2 (MWh) per year. The highest wind turbine exergy efficiency is 0.48 in the Ardabil region, and the highest exergy efficiency in the Marvast region is 0.18. The amount of reduction of CO2 gas production, using wind turbines in comparison to gas and diesel power plants in Ardabil, are 1.1 and 2.1 tons and in Marvast are 1.5 and 2.9 tons per year. This reduction in CO2 greenhouse gas per year is equal to using a forest region of 1000 (m2) to 3000 (m2). The use of wind turbines reduces the fuel consumption of diesel power plants in the Ardabil region for the amount of 797.4 liters and in the Marvast region for the amount of 1244 liters of diesel per year. According to this review, it can be concluded that in addition to wind speed, air humidity plays a significant role in the selection, installation, and commissioning of wind turbines in the region. According to this survey, it can be seen that in the Ardabil region, the wind speed of the wind turbine has a higher exergy efficiency than in the Marvast region, and it can be concluded that the wind turbine has performed better in the Ardabil region.

Environmental Flows describes the timing, quality, and quantity of water flows required to sustain ecosystems, human well-being and livelihoods that depend upon them. A review of the present status of environmental flow methodologies revealed the existence of 4 differentiated methodologies. The main purpose of this paper is to assess common methods of environmental flow requirements. According to the standards of the Ministry of Energy of Iran, Tennant introduced as the base method for determining the environmental flows. This method together with wetted perimeter method with three different ideas is applied to the SefidRud. Also, the habitat simulation method, which is a part of the ecological method, is applied to SefidRud River too. Huso Huso fish was chosen as the species river target in this research study. The advantages and limitations of the above mentioned methods are presented as a part of results. 20% and 30% of the annual average flows are suggested for maintaining river health in poor and good conditions, respectively. The combined simulation method habitats and the maximum curvature of the wetted perimeter are recommended as a native method for SefidRud River to determine the minimum ecological flow and improve the ecosystem of the studied river.

Introduction: Investigating the potential global warming, greenhouse gas emissions and energy flow is one of the methods for comparing the agricultural systems in terms of environmental hazards. This research examines the energy flow and greenhouse gas emissions (CO2, N2O and CH4) in rapeseed (Brassica Napus L) in North Khorasan province of Iran. Material and Methods: This research was studied separately in three regions of East, West and South in North Khorasan Province. Energy input values of rapeseed fields were collected using a face-to-face questionnaire in the 2020-2019 crop years. Results: The results showed that the total input energy was 35809. 68 MJ. ha-1 and the total output energy was 128545. 05 MJ. ha-1. Energy use efficiency was 1. 34 and energy productivity was 0. 055 kg/MJ. ha-1. Among the studied areas, the highest energy efficiency with an average of 1. 54 and the highest energy productivity of 0. 064 kg/MJ. ha-1 was related to the western region. Direct and indirect input energies were 61. 77% and 38. 23%, respectively, the study of greenhouse gas emissions showed that CO2, N2O and CH4 emissions were estimated to be 1417. 04, 3. 09 and 1. 90 kg. ha-1, respectively. The global warming potential was calculated as 2413. 38 kg equivalent of carbon dioxide per hectare, with the share of CH4 1%, CO2 58% and N2O 41%. Conclusion: The best area for rapeseed production in this province is the western area and the southern area is not a suitable area for the development of this crop. However, by managing energy consumption, planting date and managing the use of chemical fertilizers, energy efficiency in canola production in the southern region of North Khorasan province can be improved.